characteristic:1. All liquid silica gel products can be produced and processed with different types of equipment of Jiechen, and different colors can be added according to user requirements;2. The equipment is equipped with modern SPS control system, and the machine can be operated easily through several switches and buttons;3. The switch contact can avoid material shortage and overpressure or low pressure;4. Pigments and additives are mixed in the mixing module of the feeder, which results in the shortest flushing path, which also reduces the material loss.5. The use of direct feed, so that air can not enter the pipe, no exhaust, greatly reduce the waste of raw materials and labor, can effectively eliminate the problem of AB ratio caused by raw material barrel deformation, unique design to ensure a stable feed ratio of 1:1.Applicable production scope:1. All the liquid silica gel injection molding machines are equipped to complete the A and B rubber pumping and feeding operations.2. Electronic products, auto parts, medical supplies, adult products, maternal and infant products, kitchen and bath supplies, diving supplies, etc. Technical parameters of liquid silica gel feeder

名目/PROJECT	单元/UNIT	参数/PARAMETER
送料压力	Mpa	0-20
Feed pressure
输入量	g/min	3500
Output quantity
供料体系	L	20/200
Feeding system
功率请求	V/HZ KW	380/50 2.2
Power requirement
夹杂比例	A:B	1:1
Mixing ratio
比例精度	AB	±1%
Ratio accuracy
氛围压力	kgf/cm2	6
Air pressure
输配管	M	Φ3/4*2.7
Transmission and distrbution
实际机重	T	960
Machine weight
机械尺寸 长*宽*高	M	1.3*1.05*2.3/3.1
The machine size L*W*H